Beer Equipment

Sort by:
1/2" Stainless Ball Valve

Equipment

$ 16.75
1/2" Full port stainless ball valve

1/2" Stainless Ball Valve

$ 16.75

Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.


More Details
Domed Stainless Steel False Bottom

Equipment

From $ 38.00
Domed Stainless Steel False Bottom

Domed Stainless Steel False Bottom

$ 38.00

Available in a 9 or 12 inch diameter, these false bottoms perfectly fit round 5 gallon and 10 gallon water coolers, respectively. The design allows for heavy grain bills and even lautering for better efficiency during the sparge. Also suitable in converted sankey kegs. Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" ...


More Details
Sale
Fermentap Weldless Dial Thermometer
Fermentap Weldless Dial Thermometer

Equipment

$ 29.75 $ 34.95
Fermentap Weldless Dial Thermometer

Fermentap Weldless Dial Thermometer

$ 29.75

A wonderful addition to your mashtun, kettle, or HLT. Complete assembly includes the dial thermometer and probe, bulkhead, and silicone gasket. Constructed from 304 stainless. Available with either a 2" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun).


More Details
Oxygenation System

Equipment

$ 55.75
Oxygenation System

Oxygenation System

$ 55.75

Includes filter, regulator, stainless diffusion stone, and tubing. It's everything you need, except for the disposable oxygen tank, which is available at most hardware stores. Providing sufficient oxygen will help ensure a faster start to fermentation, full attenuation, and helps eliminate off-flavors due to stressed yeast (assuming a proper pit...


More Details
Stainless 1/2" FPT Barb

Equipment

$ 5.25
Stainless 1/2" FPT Barb

Stainless 1/2" FPT Barb

$ 5.25

1/2" FPT (female pipe thread) with either a 1/2" or 3/8" barb. Perfect for attaching to any 1/2" MPT fitting, such as found on pumps. 304 stainless steel.


More Details
Stainless 1/2" FPT Full Coupler

Stainless 1/2" FPT Full Coupler

$ 5.25

1/2" FPT (female pipe thread) full coupler has threads through the entire center. Roughly 1.5" length. 304 stainless.


More Details
Stainless 1/2" MPT Barb

Equipment

$ 5.25
Stainless 1/2" MPT Barb

Stainless 1/2" MPT Barb

$ 5.25

1/2" MPT (male pipe thread) with either a 1/2" or 3/8" barb. Perfect for insertion into a ball valve or other 1/2" FPT port. 304 stainless steel.


More Details
Stainless 1/2" MPT Locknut

Equipment

$ 5.25
Stainless 1/2" MPT Locknut

Stainless 1/2" MPT Locknut

$ 5.25

1/2" FPT (female pipe thread) locknut. 304 stainless steel.


More Details
Stainless 1/2" MPT Nipple

Equipment

$ 5.25
Stainless 1/2" MPT Nipple

Stainless 1/2" MPT Nipple

$ 5.25

1/2" MPT (male pipe thread) nipple with hex center for easy installation and removal. 304 stainless steel.


More Details
Sold Out
Stainless Steel Inline Aeration/Oxygenation Diffusion Stone
Stainless Steel Inline Aeration/Oxygenation Diffusion Stone

Stainless Steel Inline Aeration/Oxygenation Diffusion Stone

$ 34.58

A 304 Stainless Steel inline oxygenation tee with 2 Micron stone. Just hook your O2 line to the barb on the infusion stone and you're ready to infuse wort with pure oxygen as it passes through. We recommend using teflon tape on the threads to ensure a tight seal. Threads are 1/2" NPT.NOTE: May take up to three weeks for delivery.


More Details
Stainless Weldless Ball Valve

Equipment

$ 34.75
Stainless Weldless Ball Valve

Stainless Weldless Ball Valve

$ 34.75

Perfect for conversion projects such as building a mashtun or adding a ball valve to your brew kettle. No welding required, just a 1" diameter hole. Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. 


More Details